Mechanical properties and strengthening mechanisms in laser beam welds of pure titanium

Author： Liu H   Nakata K   Yamamoto N   Liao J  

Publisher： Maney Publishing

ISSN： 1743-2936

Source： Science and Technology of Welding & Joining, Vol.16, Iss.7, 2011-10, pp. : 581-585

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

The mechanical properties and strengthening mechanisms in laser beam welds of pure titanium were investigated. Although grain coarsening is evidently observed in the heat affected zone (HAZ) and fusion zone (FZ) compared with the base metal (BM), the tensile and hardness tests indicate that the HAZ and FZ are stronger than the BM under the welding conditions employed in the present work. The strengthening mechanism in the HAZ is ascribed to the substructure strengthening and that in the FZ is attributed to the combination of the substructure strengthening and the solute solution strengthening.

Related content

Mechanical properties of HSLA-65 hybrid laser arc welds

By Nolting A E   Munro C   Cao X J   Wanjara P  

Canadian Metallurgical Quarterly, Vol. 51, Iss. 3, 2012-07 ,pp. : 336-345 (10)

Maney Publishing

Access to resources Recommend Favorite

Orientation Effect on Mechanical Properties of Commercially Pure Titanium at Room Temperature

By Battaini M.   Pereloma E.V.   Davies C.H.J.  

Metallurgical and Materials Transactions A, Vol. 38, Iss. 2, 2007-02 ,pp. : 276-285 (10)

Springer Publishing Company

Access to resources Recommend Favorite

Microstructure and mechanical properties of Sc modified Al–Cu alloy (AA2219) electron beam welds

By Seshagiri P. C.   Madhusudan Reddy G.   Srinivasa Rao K.   Govinda Raju M.   Bhattacharya S. S.   Prasad Rao K.  

Science and Technology of Welding & Joining, Vol. 13, Iss. 5, 2008-07 ,pp. : 415-421 (7)

Maney Publishing

Access to resources Recommend Favorite

Reduction of residual stresses in laser beam welds by means of defocused laser beams

By Tölle F   Gumenyuk A   Rethmeier M  

Science and Technology of Welding & Joining, Vol. 17, Iss. 5, 2012-07 ,pp. : 381-385 (5)

Maney Publishing

Access to resources Recommend Favorite

Microstructure and mechanical properties of diffusion bonded titanium/304 stainless steel joint with pure Ag interlayer

By Deng Y Q   Sheng G M   Huang Z H   Fan L Z  

Science and Technology of Welding & Joining, Vol. 18, Iss. 2, 2013-02 ,pp. : 143-146 (4)

Maney Publishing

Access to resources Recommend Favorite