Establishment of traceability of the UME piston-cylinder for the 0.5 GPa range of hydraulic pressure, in cooperation with the BNM-LNE and the PTB

By Orhan M. H.   Legras J. C.   Jager J.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 693-696

IOP Publishing

Access to resources Recommend Favorite

Symmetric and asymmetric interferometric method for ultrasonic compressional and shear wave velocity measurements in piston-cylinder and multi-anvil high-pressure apparatus

By Mueller Hans J.   Lauterjung Joern   Schilling Frank R.   Lathe Christian   Nover Georg  

European Journal of Mineralogy, Vol. 14, Iss. 3, 2002-06 ,pp. : 581-589

E. Schweizerbart'sche Verlagsbuchhandlung

Access to resources Recommend Favorite

Feasibility of directly measuring piston-cylinder distortion

By Idowu A.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 575-578

IOP Publishing

Access to resources Recommend Favorite

Piston-cylinder assemblies of 5 cm² cross-sectional area used in an oil-operated primary pressure balance standard for the 10 MPa range

By Jager J.   Sabuga W.   Wassmann D.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 541-544

IOP Publishing

Access to resources Recommend Favorite

Temperature distribution in piston-cylinder assemblies: Numerical simulations and laboratory experiments

By Schilling Frank   Wunder Bernd  

European Journal of Mineralogy, Vol. 16, Iss. 1, 2004-01 ,pp. : 7-14

E. Schweizerbart'sche Verlagsbuchhandlung

Access to resources Recommend Favorite