Bulk and surface structures of iron doped zirconium oxide systems: Influence of preparation method

Author： Wyrwalski F. Lamonier J. Siffert S. Zhilinskaya E. Gengembre L. Aboukaï A.

ISSN： 0022-2461

Source： Journal of Materials Science, Vol.40, Iss.4, 2005-02, pp. : 933-942

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Three different Fe-Zr oxide systems were prepared using firstly classical impregnation of iron nitrates on calcined ZrO₂ (Fe_x/ZrO₂, x represents Fe/Zr ratio = 0.01 and 0.11), secondly impregnation of iron nitrates on dried zirconium hydroxide ZrO(OH)₂ (Fe_x/ZrO(OH)₂) and finally hydrolysis of aqueous suspension of iron and zirconium salts to coprecipitate iron and zirconium hydroxides (Fe_x-Zr). Thermal decomposition study of dried samples evidenced a delay in the temperature crystallization of zirconia for Fe_x-Zr and Fe_x/ZrO(OH)₂, the more the iron content in the sample, the more important the delay. For these samples, the formation and the stabilization of different phases were evidenced by several characterization techniques : X-Ray Diffraction (XRD), Raman spectroscopy and Electron Paramagnetic Resonance (EPR).The interaction of iron species with zirconia was different in accordance with different preparations. A bulk dispersion of the coprecipitated sample was observed and as a consequence Zr^{3 +} defects in the solid were not produced. In the case of Fe_x/ZrO₂ sample, production of surface Zr^{3 +} ions was established at low temperature of calcination (up to 600^∘C) and explained by the reaction of NO₃⁻ with Zr^{4 +} on the zirconia surface. However such interaction did not occur for Fe_x/ZrO(OH)₂ since a low dispersion of iron species was observed by X-ray Photoelectron Spectroscopy (XPS), deposited phase (Fe₂O₃) forming preferentially blocks. Temperature Programmed Reduction (TPR) showed that the reduction of small particles of Fe₂O₃ and bulk Fe₂O₃ present in the impregnated samples was easier than that of iron species well dispersed in the bulk of the coprecipitated solid.