Thickness optimized nanocrystalline ZnO-coated silicon nanowires for cold cathode application

Author： Das N. Banerjee D. Chattopadhyay K.

ISSN： 0022-2461

Source： Journal of Materials Science, Vol.48, Iss.2, 2013-01, pp. : 750-757

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Silicon nanowire is an important material for the potential use as a cold cathode, but there are some bottlenecks like oxidation of the surface during field emission thereby degradation of its performance. To compete with carbon based nanostructures in this field the performance of Si nanowires as field emitter should be improved. Here, we report a simple technique for the significant improvement of field emission properties of Si nanowires by ZnO nanoparticle coating. Boron-doped p-type Si wafers were chemically etched to synthesize vertically aligned silicon nanowires and they were coated with different thicknesses of ZnO layer by radio frequency magnetron sputtering technique. The nanostructured thin films were studied by X-ray photoelectron spectroscopy for compositional and valence states information while their morphological information was obtained by a field emission scanning electron microscope and a high resolution transmission electron microscope. The field assisted electron emission performance of Si nanowires significantly improved for the thickness optimized ZnO coating. The photoluminescence spectra showed a peak at ~558 nm assigned to surface defect states of ZnO and the field emission from Si nanowires coated with ZnO for different times were correlated with the surface defect structures. The mechanism of such improvement is also discussed.