Author： Nishi Tsuyoshi Shibata Hiroyuki Waseda Yoshio Ohta Hiromichi
Publisher： Springer Publishing Company
ISSN： 1543-1940
Source： Metallurgical and Materials Transactions A, Vol.34, Iss.12, 2003-12, pp. : 2801-2807
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
New attempts were made for the measurement of thermal diffusivity of molten iron, cobalt, and nickel at temperatures close to 1900 K by a laser flash method. A simple but useful sample cell system was developed to keep the molten metal shape uniform for a given thickness. It is also necessary to consider the effect of not only the radiative heat loss but also the conductive heat loss at the interface between the molten metal sample and the sample cell material under the present experimental conditions. The conductive heat loss was found, through computational simulation, to be negligibly small for the present laser flash measurements. Thermal conductivity values of molten iron, cobalt, and nickel were calculated by combining the present thermal diffusivity data with specific heat and density, and the resulting values are given in the following equations (unit: W m−1 K−1)
Related content
By Yamasue Eiji Susa Masahiro Fukuyama Hiroyuki Nagata Kazuhiro
Metallurgical and Materials Transactions A, Vol. 30, Iss. 8, 1999-08 ,pp. :
Access to resources
Recommend
The Metallurgy of Iron-Nickel and Iron-Nickel-Cobalt Diffusion Coatings
By Lee G. M. C.
Canadian Metallurgical Quarterly, Vol. 25, Iss. 4, 1986-10 ,pp. :
Electrodeposition and Thermal Treatment of Nickel Coatings Containing Cobalt
Solid State Phenomena, Vol. 2015, Iss. 228, 2015-05 ,pp. :