

Author: Oh J. H. Lim J. N. Lee S. S. Lim K. J. Kim H. H.
Publisher: Taylor & Francis Ltd
ISSN: 0015-0193
Source: Ferroelectrics, Vol.409, Iss.1, 2010-01, pp. : 128-138
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Piezoelectric micro-pump should contain the physical running parts like check valves for acquiring the unilateral motion of fluid from the alternating motion of actuators. But the check valves raise many problems such as abrasion or exhaustive destruction by the recursive mechanical displacement. And the performances of micro pump are deteriorated by them. To solve these problems, we propose a novel type piezoelectric valveless micro-pump using peristaltic motion due to the travelling wave excitation. Proposed pump model consists of two piezoelectric ceramic plates, elastic metal body, caps for covering flow path, rubber rings for tight sealing and disk springs for the pressurization of pump body. The FEM simulation analysis of the proposed pump model was carried out to verify its operation mechanism. And a prototype pump was fabricated and evaluated to validate the proposed concepts. Maximum back pressure was 0.97kPa and flow rate was 640μl/min under 130Vrms, 67.5kHz of driving voltage.
Related content


A compact and high flow-rate piezoelectric micropump with a folded vibrator
Smart Materials and Structures, Vol. 23, Iss. 11, 2014-11 ,pp. :




Design and Characteristics of Bar Type Piezoelectric Micropump
By Lim J. N. Oh J. H. Lee S. S. Baik C. S. Kim H. H. Lim K. J.
Ferroelectrics, Vol. 409, Iss. 1, 2010-01 ,pp. :


A Peristaltic Micro Pump Driven by a Rotating Motor with Magnetically Attracted Steel Balls
By Du Min Ye Xiongying Wu Kang Zhou Zhaoying
Sensors, Vol. 9, Iss. 4, 2009-04 ,pp. :


PDMS Based Thermopnuematic Peristaltic Micropump for Microfluidic Systems
Journal of Physics: Conference Series , Vol. 34, Iss. 1, 2006-04 ,pp. :