Author： Chen Wen-Ray Bai Jau-An Huang Chien-Jung Meen Teen-Hang
Publisher： Taylor & Francis Ltd
ISSN： 0015-0193
Source： Ferroelectrics, Vol.420, Iss.1, 2011-01, pp. : 95-100
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In our experiments, by varying the concentration of YAG phosphor, the deposition thickness of YAG phosphor plate can be controlled approximately 16 to 40 micrometer under a bias voltage of 200 V. By combining the blue LED light and the above EPD YAG phosphor plate, the white light with a correlated colour temperature (CCT) can be achieved and varied from 3800 K to 6000 K. In the conventional dispense package, the larger CCT variation was always found and varied from 80 K to 1500 K which is related to the packing density. However, in our EPD YAG case, the uniform white light was achieved easily, i.e. that is the lower CCT variation. In addition, the external extraction efficiency was also found higher than the tradition white LED.
Related content
Characterization of electrophoretic suspension for thin polymer film deposition
Journal of Physics: Conference Series , Vol. 356, Iss. 1, 2012-03 ,pp. :
Access to resources
Recommend
Access to resources
Modeling the electrophoretic deposition of colloidal particles
By Pérez A. T. Saville D. Soria C.
EPL (EUROPHYSICS LETTERS), Vol. 55, Iss. 3, 2010-03 ,pp. :
Spectroscopic characterization of YAG and Nd:YAG single crystals
By Kostić S Lazarević Z Romčević M Radojević V Milutinović A Stanišić G Gilić M
Physica Scripta, Vol. 2014, Iss. 162, 2014-09 ,pp. :