Solute-diffusion-controlled dislocation creep in pure aluminium containing 0.026 at.% Fe

Author： Sherby Oleg D. Goldberg Alfred Ruano Oscar A.

ISSN： 1478-6443

Source： Philosophical Magazine, Vol.84, Iss.23, 2004-08, pp. : 2417-2434

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Pure aluminium containing about 200 at.ppm Fe in solution is shown to creep about 10 6 times slower at 200°C than the same aluminium containing a negligible amount of iron in solution. The high creep resistance of the Al-200 at.ppm Fe alloy is attributed to the presence of subgrain boundaries containing iron solute atoms. It is proposed that the opposing stress fields from subgrain boundaries and from the piled-up dislocations during creep are cyclically relaxed, by iron solute diffusion, to allow climb of the lead dislocation in the pile-up. The mechanism is a form of mechanical ratcheting. The model is applied to Al-Fe alloys and correctly predicts that the creep rate is controlled by the rate of iron solute diffusion and by a temperature dependence equal to the activation energy for iron diffusion, namely Q c = 221 kJ mol −1 . Basic creep studies on solid-solution alloying with solute atoms that diffuse slowly in the lattice of aluminium (e.g. manganese, chromium, titanium and vanadium) appear worthy of study as a way of enhancing creep strength and of understanding creep mechanisms involving solute-atom-containing subgrain boundaries.