Modeling the Inactivation of Particle-Associated Coliform Bacteria

Author： Emerick Robert W. Loge Frank J. Ginn Tim Darby Jeannie L.

ISSN： 1061-4303

Source： Water Environment Research, Vol.72, Iss.4, 2000-07, pp. : 432-438

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

An equation was derived for describing the measured inactivation of particle-associated coliform bacteria in wastewater secondary effluent exposed to UV light disinfection. Parameters of importance are the inactivation rate coefficient and the total number of particles that contain coliform bacteria. Prediction of coliform bacteria dose–response is possible to within the error associated with the multiple-tube fermentation test. The theoretically derived modeling equation can be used with other design approaches that have specific strengths (e.g., incorporation of regulatory permit limitations or hydraulic characteristics). A minimum particle size seems to govern the ability of a particle to shield coliform bacteria from UV light. Particles smaller than that size do not contain regions shielded from UV light. At sizes greater than the critical particle size, size is not significant in determining shielding of coliform bacteria. Coliform bacteria are not typically located in the most shielded regions within particles, and therefore the inactivation of coliform bacteria within a particle does not indicate the application of UV light throughout that particle.