Variations in mouthguard thickness according to fabrication method

E-ISSN： 1600-9657|31|2|130-135

ISSN： 1600-4469

Source： DENTAL TRAUMATOLOGY, Vol.31, Iss.2, 2015-04, pp. : 130-135

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Difference in vacuum‐formed mouthguard thickness according to heating condition

DENTAL TRAUMATOLOGY, Vol. 31, Iss. 3, 2015-06 ,pp. : 233-237

John Wiley & Sons Inc

Access to resources Recommend Favorite

Variation in mouthguard thickness due to different heating conditions during fabrication: Part 2

DENTAL TRAUMATOLOGY, Vol. 31, Iss. 1, 2015-02 ,pp. : 18-23

John Wiley & Sons Inc

Access to resources Recommend Favorite

Pressure‐forming method using a single‐mouthguard sheet

DENTAL TRAUMATOLOGY, Vol. 34, Iss. 1, 2018-02 ,pp. : 41-45

John Wiley & Sons Inc

Access to resources Recommend Favorite

Investigation of vacuum forming techniques for reduction of loss in mouthguard thickness: part 2—effects of sheet grooving and thermal shrinkage

DENTAL TRAUMATOLOGY, Vol. 31, Iss. 4, 2015-08 ,pp. : 314-317

John Wiley & Sons Inc

Access to resources Recommend Favorite

Project Mouthguard

By Miller Faith Y DeMattei Ronda Summers Dwayne G Carrico Amy

Journal of Dental Hygiene, Vol. 79, Iss. 4, 2005-0 ,pp. : 14-14

American Dental Hygienists' Association

Access to resources Recommend Favorite