Publisher： John Wiley & Sons Inc
E-ISSN： 1547-5905|61|10|3159-3171
ISSN： 0001-1541
Source： AICHE JOURNAL, Vol.61, Iss.10, 2015-10, pp. : 3159-3171
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The influence of impeller type in a mechanically stirred airlift bioreactor was analyzed in relation to the non‐Newtonian viscous fluids. The agitation was carried out through a marine impeller (axial impeller) and a paddle impeller (radial impeller) located along with the gas sparger in the region comprised by the riser. The bioreactor was sparged with air under different velocities (0.036–0.060 m s−1). Carboxymethylcellulose 1.94% and xanthan 1.80% were used as a fluid model. The gas holdup and volumetric mass‐transfer coefficient increased in up to five and three times, respectively, when compared to a conventional airlift bioreactor; however, better results were obtained when the straight paddle impeller type was used. The results suggest that the studied bioreactor can be used successfully in viscous fluid, and it can be more efficient than conventional airlift bioreactors. The results obtained suggest the use of radial impellers. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3159–3171, 2015
Related content
Access to resources
Recommend
Automated measurements of gas‐liquid mass transfer in micropacked bed reactors
AICHE JOURNAL, Vol. 64, Iss. 2, 2018-02 ,pp. :