A new steel framing system for seismic protection of timber platform frame buildings. Implementation with hysteretic energy dissipators

Publisher： John Wiley & Sons Inc

E-ISSN： 1096-9845|44|8|1181-1202

ISSN： 0098-8847

Source： EARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Vol.44, Iss.8, 2015-07, pp. : 1181-1202

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames

By  

EARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Vol. 44, Iss. 8, 2015-07 ,pp. : 1289-1307

John Wiley & Sons Inc

Access to resources Recommend Favorite

Seismic behavior of steel buildings with out‐of‐plumb

By  

EARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Vol. 44, Iss. 14, 2015-11 ,pp. : 2575-2588

John Wiley & Sons Inc

Access to resources Recommend Favorite

Low cyclic fatigue and hysteretic behavior of U‐shaped steel dampers for seismically isolated buildings under dynamic cyclic loadings

By  

EARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Vol. 44, Iss. 10, 2015-08 ,pp. : 1523-1538

John Wiley & Sons Inc

Access to resources Recommend Favorite

Steel solutions for enabling zero‐energy buildings

By  

STEEL CONSTRUCTION - DESIGN AND RESEARCH, Vol. 8, Iss. 3, 2015-09 ,pp. : 194-200

John Wiley & Sons Inc

Access to resources Recommend Favorite

Partial mass isolation system for seismic vibration control of buildings

By  

STRUCTURAL CONTROL AND HEALTH MONITORING (ELECTRONIC), Vol. 25, Iss. 2, 2018-02 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite