Copilot Pro®: A full method for the steering of the machining

Author： Pairel É.   Goldschmidt E.   Vayre B.   Adragna P.-A.   Pillet M.  

Publisher： Edp Sciences

E-ISSN： 2107-6847|2|1|39-44

ISSN： 2107-6839

Source： International Journal of Metrology and Quality Engineering, Vol.2, Iss.1, 2011-06, pp. : 39-44

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Correction of machining operations with the Total Inertial Steering

By Boukar A.   Pillet M.   Pairel E.   Sergent A.  

International Journal of Metrology and Quality Engineering, Vol. 5, Iss. 1, 2014-09 ,pp. : 103-103

Edp Sciences

Access to resources Recommend Favorite

State of art of cooling method for dry machining

By  

MATEC Web of conference, Vol. 90, Iss. issue, 2016-12 ,pp. : 01015-01015

Edp Sciences

Access to resources Recommend Favorite

Simulation of the electrode shape change in electrochemical machining based on the level set method

By Topa V.   Purcar M.   Avram A.   Munteanu C.   Chereches R.   Grindei L.  

EPJ Applied Physics (The), Vol. 58, Iss. 1, 2012-03 ,pp. : 11301-11301

Edp Sciences

Access to resources Recommend Favorite

Research on the Test Method of Machining Stress Based on the Instrumented Indentation Test

By  

MATEC Web of conference, Vol. 108, Iss. issue, 2017-05 ,pp. : 02006-02006

Edp Sciences

Access to resources Recommend Favorite

Is a Full Nonlinear Method Necessary for the Prediction of Radiated Engine Exhaust Noise?

By Jones Adrian D.   Van Moorhem William K.   Voland Randall T.  

Noise Control Engineering Journal, Vol. 26, Iss. 2, 1986-03 ,pp. : 74-80

Institute of Noise Control Engineering

Access to resources Recommend Favorite