Publisher： Trans Tech Publications
E-ISSN： 1662-9795|2016|707|154-158
ISSN： 1013-9826
Source： Key Engineering Materials, Vol.2016, Iss.707, 2016-10, pp. : 154-158
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The proposed finite element analysis (FEA) model was constructed using FEA simulation software, ANSYS program, for determining effects of corrosion fatigue (CF) from TIG welding process on AISI 304 stainless steel workpiece. The FEA model of TIG welding process was developed from Goldak's double ellipsoid moving heat source. In this paper, the residual stress results obtained from the FEA model were consistent with results from the X-ray diffraction (XRD) method. The residual stress was further used as an input in the next step of corrosion fatigue analysis. The predictive CF life result obtained from the FEA CF model were consistent with the value obtained from stress-life curve (S-N curve) from the reference literaturature. Therefore, the proposed FEA of CF model was then used for predicting the corrosion fatigue life on TIG welding workpiece, the results from the model showed the corrosion fatigue life of 1,794 cycles with testing condition of the frequency ( f ) = 0.1 Hz and the equivalent load of 67.5 kN (equal to 150 MPa) with R = 0.25.
Related content
Analysis on the Melt Welding Process of the Finite Element for 7022 Aluminum Alloy
Key Engineering Materials, Vol. 2016, Iss. 693, 2016-06 ,pp. :
Access to resources
Recommend
3D finite element simulation of TIG weld pool
IOP Conference Series: Materials Science and Engineering, Vol. 33, Iss. 1, 2012-07 ,pp. :
Access to resources