Publisher： Edp Sciences
E-ISSN： 2257-7750|16|7|709-709
ISSN： 2257-7777
Source： Mechanics & Industry, Vol.16, Iss.7, 2015-11, pp. : 709-709
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In the article the experimental study of influences of laser beam profiling on the microstructure of the material obtained by selective laser melting is presented. Microstructure was researched by the example of single-track formation. For these needs the optical and video-monitoring stand was constructed. The defects of single-track formation were obtained by microscopy and video monitoring. The technological gaps for each laser beam profile give the possibility to use higher power for laser systems in the future with the purpose to improve productivity of SLM processing.
Related content
Optical diagnostics of selective laser melting and monitoring of single-track formation
MATEC Web of conference, Vol. 129, Iss. issue, 2017-11 ,pp. :
Access to resources
Recommend
Study of oxygen effect on the melting pool temperature during selective laser melting
Mechanics & Industry, Vol. 17, Iss. 7, 2016-12 ,pp. :
Access to resources
The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg
MATEC Web of conference, Vol. 78, Iss. issue, 2016-10 ,pp. :
Study of characteristics of steel specimens after selective laser melting of powder materials MS1
MATEC Web of conference, Vol. 129, Iss. issue, 2017-11 ,pp. :