Publisher： Trans Tech Publications
E-ISSN： 1662-9779|2016|258|583-586
ISSN： 1012-0394
Source： Solid State Phenomena, Vol.2016, Iss.258, 2017-01, pp. : 583-586
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
This article deals with properties of plasma nitrided layers in depth. The redistribution of alloy elements and C-N in depth of nitrided layers was analysed. The plasma nitriding process was used for creation of nitrided layers [1]. The nitrided layers were applied to 32CrMoV12-10 steel used for stressed machine parts. Samples were subsequently evaluated by metallographic, OES, hardness and microhardness methods. The results of measurement showed connection between chemical composition of alloying elements after chemical-heat treated process and universal hardness, microhardness.
Related content
Access to resources
Recommend
Fatigue Crack Surface Topography after Plasma Nitriding Process
Solid State Phenomena, Vol. 2016, Iss. 258, 2017-01 ,pp. :
Access to resources
Influence of oxygen in plasma nitriding
International Heat Treatment & Surface Engineering, Vol. 3, Iss. 4, 2009-12 ,pp. :
Simulation of the ferritic nitriding process
By Yang M Yao B Sohn Y H Sisson R D
International Heat Treatment & Surface Engineering, Vol. 5, Iss. 3, 2011-09 ,pp. :
Simulation of the Nitriding Process
Metal Science and Heat Treatment, Vol. 46, Iss. 1-2, 2004-01 ,pp. :