

Publisher: Edp Sciences
E-ISSN: 2100-014x|114|issue|02058-02058
ISSN: 2100-014x
Source: EPJ Web of Conference, Vol.114, Iss.issue, 2016-03, pp. : 02058-02058
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The paper deals with the problems of cavitation in water flow in the nozzle. The area of research is divided into two directions (experimental and numerical research). During the experimental research the equipment with the nozzle is under the measurement and basic physical quantities such as pressure and volume flow rate are recorded. In the following phase measuring of noise which is generated during flow through the nozzle in the area of cavitation is measured at various operating conditions of the pump. In the second part the appropriate multiphase mathematical model including the consideration of cavitation is defined. Boundary conditions for numerical simulation are defined on the basis of experimental measurements. Undissolved air in the flow is taken into account to obtain pressure distribution in accordance to measured one. Results of the numerical simulation are presented by means of basic current quantities such as pressure, velocity and volume fractions of each phase. The conclusions obtained from experimental research of cavitation were applied to modify the multiphase mathematical model.
Related content


Multiphase flow and cavitation - Comparison of Flow in Rectangular and Circular Nozzle
EPJ Web of Conference, Vol. 92, Iss. issue, 2015-05 ,pp. :


Experimental research of a microjet cavitation
EPJ Web of Conference, Vol. 25, Iss. issue, 2012-04 ,pp. :


Research on Underwater Vehicle Based on Multiphase Flow Control
MATEC Web of conference, Vol. 25, Iss. issue, 2015-10 ,pp. :


By Shin Seungyoung Yonamine Mikko Tokumoto Akira Kuguyama Horoki Aoki Toshiyuki
INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2011, Iss. 6, 2011-07 ,pp. :