

Publisher: Edp Sciences
E-ISSN: 2261-236x|68|issue|02003-02003
ISSN: 2261-236x
Source: MATEC Web of conference, Vol.68, Iss.issue, 2016-08, pp. : 02003-02003
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Based on MJ3310 woodworking band saw machine as the research object, under the no-load and load of Vib system vibration signal acquisition, processing and analysis software of band saw blade transverse vibration test and the signal acquisition and analysis of the collected signals obtained: to determine the transverse vibration displacement 5.66μm ~ 7.86μm and the main vibration frequency between 624 Hz ~ 792 Hz, then saw blade crack at least 3 mm, need timely saw blade, cutting high hardness of wood band saw blade transverse vibration displacement and frequency will increase sharply. Can be generated according to the band saw blade crack before and after the changing rule of the horizontal vibration displacement and frequency of transverse vibration and scope, judgment and replacement time of saw blade saw blade defect types, which can fully rational utilization of saw blade work effectively.
Related content








Calculation of the Stiffness in the Roll Tensioning of the Circular Saw Blade
MATEC Web of conference, Vol. 51, Iss. issue, 2016-04 ,pp. :