Experimental Prediction of Wear Rate on Rail and Wheel Materials at Dry Sliding Contact

E-ISSN： 2261-236x|13|issue|03013-03013

ISSN： 2261-236x

Source： MATEC Web of conference, Vol.13, Iss.issue, 2014-07, pp. : 03013-03013

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Variation of contact stiffness as a parameter source of wheel/rail noise and vibration

By Kurze U.J. Nurnberger H.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1997, Iss. 6, 1997-08 ,pp. : 240-243

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Twins: A prediction model fro wheel-rail rolling noise

By Thompson D.J. Gautier P.E.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1993, Iss. 3, 1993-08 ,pp. : 1463-1466

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Experimental studies on reduction of noise from rail and wheel by hammering

By Nishiwaki Niichi

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1988, Iss. 2, 1988-08 ,pp. : 1437-1440

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Wheel rail noise

By Rasmussen Gunnar

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1990, Iss. 5, 1990-08 ,pp. : 383-386

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Influence of the track gradient on the contact temperature at the wheel-rail zone for open-pit locomotives

MATEC Web of conference, Vol. 129, Iss. issue, 2017-11 ,pp. : 06009-06009

Edp Sciences

Access to resources Recommend Favorite