Publisher： Trans Tech Publications
E-ISSN： 1662-7482|2018|879|196-200
ISSN： 1660-9336
Source： Applied Mechanics and Materials, Vol.2018, Iss.879, 2018-04, pp. : 196-200
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Generally, electric and magnetic interference will affect in high resistance measurements. This causes a large number of the standard deviation of measurement as well as the accuracy and result of measurement. The purpose of this research is to study the effectiveness of shielding and guarding on the measurement system. In experimental setup, the 1 GΩ resistance was supplied by voltage source of 100 V, 500 V and 1000 V in with and without shielding and guarding. The resistance value and standard deviation were measured and compared in each case of measurements. From the experimental results, when applying shielding and guarding, the noise can be reduced. As a result, the standard deviation was decreased more than 10 times.
Related content
Measurement of Temperature Resistance of High Power LED
Applied Mechanics and Materials, Vol. 2014, Iss. 701, 2015-01 ,pp. :
Access to resources
Recommend
Effect of Shielding Object to the Specific Heat Demand for Heating of a House
Applied Mechanics and Materials, Vol. 2016, Iss. 835, 2016-06 ,pp. :
Parallel Measurement Based on Laue Effect
Applied Mechanics and Materials, Vol. 2014, Iss. 716, 2015-02 ,pp. :
Measurement and thermal modeling of high-Q piezoelectric resonators
ISA Transactions, Vol. 39, Iss. 4, 2000-09 ,pp. :