Publisher： Edp Sciences
E-ISSN： 2261-236x|110|issue|01070-01070
ISSN： 2261-236x
Source： MATEC Web of conference, Vol.110, Iss.issue, 2017-06, pp. : 01070-01070
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The mathematical modeling of heat transfer processes proceeding together under the conditions of intense phase transformations (melting and metal evaporation) under laser action on a metal plate has been carried out. The analysis of the results has showed that increasing of the laser radiation (ql) power leads to acceleration of the melting process. However, it has been found that the change in the melting dynamics with variation of ql is characteristic only for the plates made of iron and copper. At the same time, it has been found that an increase in ql does not affect significantly the melting rate of the aluminum plates. It has been established that when the laser is exposed to a plate, zones with large temperature gradients are formed which can cause thermal stresses.
Related content
Study of oxygen effect on the melting pool temperature during selective laser melting
Mechanics & Industry, Vol. 17, Iss. 7, 2016-12 ,pp. :
Access to resources
Recommend
Heat Transfer While Incorporating Metal Particles in a Melting Support Plate
MATEC Web of conference, Vol. 72, Iss. issue, 2016-08 ,pp. :
Access to resources
MATEC Web of conference, Vol. 23, Iss. issue, 2015-08 ,pp. :