Author： Xin Ruishan Luo Jianbin Ma Qingxian
Publisher： MDPI
E-ISSN： 2075-4701|7|4|149-149
ISSN： 2075-4701
Source： Metals, Vol.7, Iss.4, 2017-04, pp. : 149-149
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The effect of parameters on internal crack healing in 30Cr2Ni4MoV steel for 600-ton ultra-super ingots was systematically investigated. The results show that the degree of crack healing increases with increasing healing temperature, holding time, reduction ratio, and hot pressure, and with decreasing strain rate. Internal crack healing in 30Cr2Ni4MoV steel should be conducted at less than 1200 °C to avoid grain coarsening. Hot pressure, in the high-temperature elastic zone and perpendicular to the crack faces, not only promotes the rapid crack healing, but also prevents grain coarsening of the matrix.
Related content
Hot Deformation Behavior of As-Cast 30Cr2Ni4MoV Steel Using Processing Maps
By Zhou Peng Ma Qingxian Luo Jianbin
Metals, Vol. 7, Iss. 2, 2017-02 ,pp. :
Access to resources
Recommend
