Publisher： Edp Sciences
E-ISSN： 2261-236x|220|issue|04008-04008
ISSN： 2261-236x
Source： MATEC Web of conference, Vol.220, Iss.issue, 2018-10, pp. : 04008-04008
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Friction has a substantial influence on the metal forming at upsetting of cylindrical aluminum specimens. The finite element method is often used to investigate this problem. This paper aims to reveal possible numerical errors and obstacles related to the 3D finite element solution of the problem. The calculation results for the proposed numerical 3D-model are compared with the experimental data. The influence of friction is demonstrated and a good agreement on the tool displacement is obtained. The features of the numerical solution of the problem in the ANSYS finite element software are shown.
Related content
Finite Element Analysis of Cylindrical Rubber Fender
MATEC Web of conference, Vol. 207, Iss. issue, 2018-09 ,pp. :
Access to resources
Recommend
Refinement issue of displaced volume at upsetting of cylindrical workpiece by radial dies
MATEC Web of conference, Vol. 224, Iss. issue, 2018-10 ,pp. :
The three-dimensional lattice as an architectural space
MATEC Web of conference, Vol. 212, Iss. issue, 2018-10 ,pp. :
Three-Dimensional ES Barrier Promotes the Steps Formation
Key Engineering Materials, Vol. 2018, Iss. 783, 2018-11 ,pp. :
Access to resources