Publisher： Edp Sciences
E-ISSN： 2261-236x|224|issue|01040-01040
ISSN： 2261-236x
Source： MATEC Web of conference, Vol.224, Iss.issue, 2018-10, pp. : 01040-01040
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The conditions for the application of taper angles of deforming rollers are considered in the article, which ensure a steady flow of the flow forming. With the help of the developed engineering technique, analytical and graphical dependences of the boundary values of the deformation degrees on the cone angle of the deforming roller are obtained. The results of the theoretical study are in good agreement with the known experimental data. The developed engineering technique can be used in designing the flow forming on the direct and reverse method, as well as for any process of pressure treatment with a local focus of deformation.
Related content
Numerical study on the effect of the die compression angle on extrusion forming of plastic pipe
MATEC Web of conference, Vol. 175, Iss. issue, 2018-07 ,pp. :
Access to resources
Recommend
Investigation of Flow over the Airfoil NACA 0010-35 with Various Angle of Attack
By Xiao Shiming
MATEC Web of conference, Vol. 179, Iss. issue, 2018-07 ,pp. :
Investigation of the effect of the angle between drive shafts on vibration responses of main reducer
By Liu Xiaogang
MATEC Web of conference, Vol. 189, Iss. issue, 2018-08 ,pp. :
The Effect of Lubrication on the Vibration of Roller Bearings
MATEC Web of conference, Vol. 217, Iss. issue, 2018-10 ,pp. :