Fabrication and dielectric properties of poly(ether ether ketone)/polyimide blends with selectively distributed multi‐walled carbon nanotubes

Publisher： John Wiley & Sons Inc

E-ISSN： 1097-0126|64|11|1555-1559

ISSN： 0959-8103

Source： POLYMER INTERNATIONAL, Vol.64, Iss.11, 2015-11, pp. : 1555-1559

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Fabrication and dielectric properties of poly(ether ether ketone)/polyimide blends with selectively distributed multi‐walled carbon nanotubes

By  

POLYMER INTERNATIONAL, Vol. 959-8103, Iss. 11, 2015-11 ,pp. : 1555-1559

John Wiley & Sons Inc

Access to resources Recommend Favorite

Enhanced electrical properties by tuning the phase morphology of multiwalled carbon nanotube‐filled poly(ether ether ketone)/polyimide composites

By  

POLYMER INTERNATIONAL, Vol. 64, Iss. 6, 2015-06 ,pp. : 828-832

John Wiley & Sons Inc

Access to resources Recommend Favorite

Novel sulfonated poly (ether ether ketone)/silica coated carbon nanotubes high‐performance composite membranes for direct methanol fuel cell

By  

POLYMERS FOR ADVANCED TECHNOLOGIES, Vol. 26, Iss. 5, 2015-05 ,pp. : 457-464

John Wiley & Sons Inc

Access to resources Recommend Favorite

Mechanical and Dielectric Properties of SiCf/AlPO4 Composites with Multi‐Walled Carbon Nanotubes

By  

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, Vol. 12, Iss. 5, 2015-09 ,pp. : 1045-1053

John Wiley & Sons Inc

Access to resources Recommend Favorite

Solvent Induced Fabrication of Solid Polymer Electrolyte Water Electrolyzer: A study in Sulfonated Poly(Ether Ether Ketone) Based Membrane Electrode Assembly

By  

FUEL CELLS (ELECTRONIC), Vol. 15, Iss. 1, 2015-02 ,pp. : 246-250

John Wiley & Sons Inc

Access to resources Recommend Favorite