Publisher： Trans Tech Publications
E-ISSN： 1662-8985|2016|1133|290-294
ISSN： 1022-6680
Source： Advanced Materials Research, Vol.2016, Iss.1133, 2016-02, pp. : 290-294
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Feedstock preparation is one of the most crucial steps that will influence the metal injection molding process. In this study, the properties of Cu and space holder powder were determined. Powder morphology was captured using Scanning Electron Microscopy (SEM). Three different ratios of feedstocks were premixed with potassium carbonate as space holder using Turbulence Shaker mixer prior to mixing with constant binder system consist of waste rubber (WR). Mixes of three feedstocks with from 40, 50 and 60 wt. % were carried out in Brabender Plasticoder. All feedstocks were mixed at constant powder loading. The feedstocks were successfully injection molded using Vertical Injection Molding machine at 200°C.
Related content
Access to resources
Recommend
Solvent Debinding of Inconel 718 Fabricated via Metal Injection Molding
Advanced Materials Research, Vol. 2016, Iss. 1133, 2016-02 ,pp. :