A temperature sensor implant for active implantable medical devices for in vivo subacute heating tests under MRI

E-ISSN： 1522-2594|79|5|2824-2832

ISSN： 0740-3194

Source： MAGNETIC RESONANCE IN MEDICINE, Vol.79, Iss.5, 2018-05, pp. : 2824-2832

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

PurposeTo introduce a temperature sensor implant (TSI) that mimics an active implantable medical device (AIMD) for animal testing of MRI heating. Computer simulations and phantom experiments poorly represent potential temperature increases. Animal experiments could be a better model, but heating experiments conducted immediately after the surgery suffer from alterations of the thermoregulatory and tissue properties during acute testing conditions. Therefore, the aim of this study was to introduce a temperature sensor implant that mimics an AIMD and capable of measuring the electrode temperature after implantation of the device without any further intervention at any time after the surgery in an animal model.

MethodsA battery‐operated TSI, which resembled an AIMD, was used to measure the lead temperature and impedance and the case temperature. The measured values were transmitted to an external computer via a low‐power Bluetooth communication protocol. In addition to validation experiments on the phantom, a sheep experiment was conducted to test the feasibility of the system in subacute conditions.

ResultsThe measurements had a maximum of 0.5°C difference compared to fiber‐optic temperature probes. In vivo animal experiments demonstrated feasibility of the system.

ConclusionAn active implant, which can measure its own temperature, was proposed to investigate implant heating during MRI examinations. Magn Reson Med 79:2824–2832, 2018. © 2017 International Society for Magnetic Resonance in Medicine.