Author： Qu Ping
Publisher： Springer Publishing Company
ISSN： 0022-2461
Source： Journal of Materials Science, Vol.48, Iss.3, 2013-02, pp. : 1231-1238
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Cellulose nanofibrils (CNFs) were blended with poly(l-lactic acid) (PLLA) to produce CNFs/PLLA composite solid foams. The dispersed CNFs' phase was partially embedded in the PLLA matrix. The CNFs not only reduced the water contact angle of the composite, but also induced the formation of hydroxyapatite (HA) on the walls of its inner pores. After incubation for 7 days in 3× simulated body fluid, a large number of HA particles were formed throughout the CNFs/PLLA composite foams. HA particles have diameters ranging from 200 nm to 2 μm and a Ca/P ratio of 1.42. The spatial distribution of calcium and phosphorus elements was uniform. A porosity of approximately 92 % was achieved after mineralization of the CNFs/PLLA composite foams. The mass of HA grown over CNFs/PLLA foams increased faster than in the case of PLLA foams. The ternary polymeric foams have potential applications in tissue engineering.
Related content
Papyrus reinforced poly(L-lactic acid) composite
By Nishino Takashi Hirao Koichi Kotera Masaru
Advanced Composite Materials, Vol. 16, Iss. 4, 2007-10 ,pp. :
Access to resources
Recommend
By Ghosh S. Viana J. Reis R. Mano J.
Journal of Materials Science: Materials in Medicine, Vol. 18, Iss. 2, 2007-02 ,pp. :
By Damadzadeh Behzad Jabari Hamideh Skrifvars Mikael Airola Karri Moritz Niko Vallittu Pekka
Journal of Materials Science: Materials in Medicine, Vol. 21, Iss. 9, 2010-09 ,pp. :
By Karal-Yilmaz Okşan Kayaman-Apohan Nilhan Misirli Zülal Baysal Kemal Baysal Bahattin
Journal of Materials Science: Materials in Medicine, Vol. 17, Iss. 3, 2006-03 ,pp. :