Author： Khlevnoy B.
Publisher： Springer Publishing Company
ISSN： 0195-928X
Source： International Journal of Thermophysics, Vol.32, Iss.7-8, 2011-08, pp. : 1763-1772
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
A new method of filling of high-temperature fixed-point cells based on metal-carbon eutectics and peritectics is suggested and tested. In this method a metal and carbon powder mixture is introduced not directly into the crucible, but into an additional container located just above the crucible. The mixture melts inside the container, and the already molten eutectic drops through a small hole in the bottom of the container and fills the crucible drop by drop. The method can be used to obtain a uniform ingot without porous or foundry cavities, to minimize the risk of contamination, and to avoid some other disadvantages. The method was applied to fabricate Re-C and WC-C cells using 5N purity materials. The cells demonstrated a good plateau shape with melting ranges of 0.2 K and 80 mK for Re-C and WC-C, respectively. The Re-C cell was compared with a cell built at NMIJ and showed good agreement with a difference of melting temperatures of only 45 mK.
Related content
New SMU Gallium Fixed-Point Cells
International Journal of Thermophysics, Vol. 32, Iss. 7-8, 2011-08 ,pp. :
Access to resources
Recommend
