Coupled Part and Mold Temperature Simulation for Injection Molding Based on Solid Geometry

ISSN： 0360-2559

Source： Polymer-Plastics Technology and Engineering, Vol.45, Iss.6, 2006-01, pp. : 741-749

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Numerical Simulation for Injection Molding with a Rapidly Heated Mold, Part I: Flow Simulation for Thin Wall Parts

By Park Keun

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 8, 2006-01 ,pp. : 897-902

Taylor & Francis Ltd

Access to resources Recommend Favorite

Numerical Simulation for Injection Molding with a Rapidly Heated Mold, Part II: Birefringence Prediction

By Park Keun

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 8, 2006-01 ,pp. : 903-909

Taylor & Francis Ltd

Access to resources Recommend Favorite

Decoupled Gating and Simulation for Injection Molding

By Johnston Stephen Kazmer David

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 4, 2006-01 ,pp. : 575-584

Taylor & Francis Ltd

Access to resources Recommend Favorite

Injection Molding Poly(Para-phenylene) with a Rapidly Heated Mold

By Kimerling Thomas

Polymer-Plastics Technology and Engineering, Vol. 48, Iss. 10, 2009-10 ,pp. : 1008-1013

Taylor & Francis Ltd

Access to resources Recommend Favorite

Fast Calculating Method and In-Mold Labeling Model for Cooling Analysis in Injection Molding

By Shen C.-Y. Zhao Z.-F. Shi X.-Z.

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 8, 2006-01 ,pp. : 985-995

Taylor & Francis Ltd

Access to resources Recommend Favorite