Fast Calculating Method and In-Mold Labeling Model for Cooling Analysis in Injection Molding

ISSN： 0360-2559

Source： Polymer-Plastics Technology and Engineering, Vol.45, Iss.8, 2006-01, pp. : 985-995

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Steady-State Module of Cooling Analysis in Injection Molding

By Chang-Yu Shen Xian-Zhang Shi Zhen-Feng Zhao

Polymer-Plastics Technology and Engineering, Vol. 46, Iss. 6, 2007-06 ,pp. : 561-568

Taylor & Francis Ltd

Access to resources Recommend Favorite

Injection Molding Poly(Para-phenylene) with a Rapidly Heated Mold

By Kimerling Thomas

Polymer-Plastics Technology and Engineering, Vol. 48, Iss. 10, 2009-10 ,pp. : 1008-1013

Taylor & Francis Ltd

Access to resources Recommend Favorite

Coupled Part and Mold Temperature Simulation for Injection Molding Based on Solid Geometry

By Cao Wei Shen Changyu Li Haimei

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 6, 2006-01 ,pp. : 741-749

Taylor & Francis Ltd

Access to resources Recommend Favorite

Construction and Analysis in Combining the Taguchi Method and the Back Propagation Neural Network in the PEEK Injection Molding Process

By Kuo Chung-Feng Jeffrey

Polymer-Plastics Technology and Engineering, Vol. 46, Iss. 9, 2007-09 ,pp. : 841-848

Taylor & Francis Ltd

Access to resources Recommend Favorite

Numerical Simulation for Injection Molding with a Rapidly Heated Mold, Part I: Flow Simulation for Thin Wall Parts

By Park Keun

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 8, 2006-01 ,pp. : 897-902

Taylor & Francis Ltd

Access to resources Recommend Favorite