Experimental Study on the Influence of Pulsatile Injection Pressure on Filling Pressure and Filling Time

By Qu Jin-ping   Zhou Weihua   Liu Bin   Pan Wenzhe  

Polymer-Plastics Technology and Engineering, Vol. 46, Iss. 7, 2007-07 ,pp. : 709-712

Taylor & Francis Ltd

Access to resources Recommend Favorite

Injection Molding Poly(Para-phenylene) with a Rapidly Heated Mold

By Kimerling Thomas  

Polymer-Plastics Technology and Engineering, Vol. 48, Iss. 10, 2009-10 ,pp. : 1008-1013

Taylor & Francis Ltd

Access to resources Recommend Favorite

Coupled Part and Mold Temperature Simulation for Injection Molding Based on Solid Geometry

By Cao Wei   Shen Changyu   Li Haimei  

Polymer-Plastics Technology and Engineering, Vol. 45, Iss. 6, 2006-01 ,pp. : 741-749

Taylor & Francis Ltd

Access to resources Recommend Favorite

The Numerical Analysis of a Mold Cavity Filling Using the Finite Control Volume Method and Comparison to the Experimental Results

By Guldas Abdulmecit   Uluer Onuralp   Ozdemir Ahmet  

Polymer-Plastics Technology and Engineering, Vol. 48, Iss. 4, 2009-04 ,pp. : 389-396

Taylor & Francis Ltd

Access to resources Recommend Favorite

Measurement and Analysis of Cavity Pressure and Melt Filling Capacity During Injection Molding

By Hong-wu Wu   Shao-dan Zhang   Jin-ping Qu   Hai-hang Xu  

Polymer-Plastics Technology and Engineering, Vol. 46, Iss. 2, 2007-02 ,pp. : 123-127

Taylor & Francis Ltd

Access to resources Recommend Favorite