A solution for profile generation in twin-screw multiphase pumps

Author： Feng C.   Ziwen X.   Pengcheng S.  

Publisher： Elsevier

ISSN： 0262-1762

Source： World Pumps, Vol.2000, Iss.408, 2000-09, pp. : 34-38

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Failure analysis of a twin‐screw pump shaft

By  

PROCESS SAFETY PROGRESS, Vol. 37, Iss. 1, 2018-03 ,pp. : 95-103

John Wiley & Sons Inc

Access to resources Recommend Favorite

A composite model for an intermeshing counter‐rotating twin‐screw extruder and its experimental verification

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 12, 2015-12 ,pp. : 2838-2848

John Wiley & Sons Inc

Access to resources Recommend Favorite

Styrene/isoprene/butadiene integrated rubber prepared by anionic bulk polymerization in a twin‐screw extruder

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 5, 2015-05 ,pp. : 1163-1169

John Wiley & Sons Inc

Access to resources Recommend Favorite

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

By  

ADVANCES IN POLYMER TECHNOLOGY, Vol. 33, Iss. 1, 2014-03 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

Leistritz -- Screw pumps for every application

By  

World Pumps, Vol. 1997, Iss. 366, 1997-03 ,pp. : 33-36

Elsevier

Access to resources Recommend Favorite