Modelling of the thermal tempering of flat glass: determination of radiative and convective heat transfer enabling prediction and control of the residual stresses

By Lochegnies Dominique   Monnoyer François   Ourak Mohamed   Siedow Norbert   Anton Johan   Langlais Richard  

Glass Technology - European Journal of Glass Science and Technology Part A, Vol. 49, Iss. 1, 2008-02 ,pp. : 1-7

Society of Glass Technology

Access to resources Recommend Favorite

Simulation and improvement of blank and blow mould cooling in the hollow glass forming process

By Bewer Thomas  

Glass Technology - European Journal of Glass Science and Technology Part A, Vol. 49, Iss. 4, 2008-08 ,pp. : 168-174

Society of Glass Technology

Access to resources Recommend Favorite

A reverse engineering approach to the design of the blank mould for the glass blow and blow process

By Lochegnies D.   Moreau P   Guilbaut R.  

Glass Technology - European Journal of Glass Science and Technology Part A, Vol. 46, Iss. 2, 2005-04 ,pp. : 116-120

Society of Glass Technology

Access to resources Recommend Favorite

Effectiveness of control of the float glass production process

By Makarov R.   Moklyachenko A.  

Glass and Ceramics, Vol. 70, Iss. 7-8, 2013-11 ,pp. : 245-246

Springer Publishing Company

Access to resources Recommend Favorite

Modelling stiffness–damage behaviour of (±45/90)_s and (90/±45)_s glass fibre reinforced polymer laminates

By Marsden W.M.   Guild F.J.   Ogin S.L.   Smith P.A.  

Plastics, Rubber and Composites, Vol. 28, Iss. 1, 1999-01 ,pp. : 30-39

Maney Publishing

Access to resources Recommend Favorite