A case study comparing 1-D and 3-D analytical modeling methods for vehicle intake system design

By Aubert Allan   Green Edward L.   Bastiaan Jennifer   Leclercq Thomas  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2005, Iss. 2, 2005-10 ,pp. : 503-508

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Accuracy evaluation of 2D geometric correction models: Iraq as a case study

By  

MATEC Web of conference, Vol. 162, Iss. issue, 2018-05 ,pp. : 03015-03015

Edp Sciences

Access to resources Recommend Favorite

Comparison of 1D and 2D models predicting a packed bed drying

By Messai Souad   El Ganaoui Mohamed   Sghaier Jalila   Chrusciel Laurent   Slimane Gabsi  

International Journal for Simulation and Multidisciplinary Design Optimization, Vol. 5, Iss. issue, 2014-02 ,pp. : A14-A14

Edp Sciences

Access to resources Recommend Favorite

Empirical Equations for the Limiting Solids Flux of Final Clarifiers

By Ah Yuen Weng  

Water Environment Research, Vol. 74, Iss. 2, 2002-03 ,pp. : 200-209

Water Environment Federation

Access to resources Recommend Favorite

ASSESSING THE APPLICABILITY OF THE 1D FLUX THEORY TO FULL-SCALE SECONDARY SETTLING TANK DESIGN WITH A 2D HYDRODYNAMIC MODEL

By Marais P M   Ekama G A   de Haas DW  

Proceedings of the Water Environment Federation, Vol. 2001, Iss. 9, 2001-01 ,pp. : 467-477

Water Environment Federation

Access to resources Recommend Favorite