Author： Kurt B. Orhan N. Kaya M.
Publisher： Maney Publishing
ISSN： 1743-2847
Source： Materials Science and Technology, Vol.25, Iss.4, 2009-04, pp. : 556-560
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In this study, the Ti–6Al–4V alloy was diffusion bonded to austenitic stainless steel at temperatures of 820, 885, 930 and 980°C, under a pressure of 5 MPa for 30 min. The effect of temperature on interface formations and microstructure was investigated using a scanning electron microscope (SEM), energy dispersive spectrograph (EDS) microanalyses, X-ray diffraction and shear strength of bonded specimens. The results showed that intermetallic phases and σ-phase formed in the interface region.
Related content
Access to resources
Recommend
By Yıldız F. Alsaran A. Çelik A. Efeoğlu İ.
Surface Engineering, Vol. 26, Iss. 8, 2010-11 ,pp. :