Potential and pH Measurements in a Crevice of the Steel BS 4360 50D in 3·5% NaCl and in Artificial Sea Water

By Turnbull A.   Gardner M. K.  

British Corrosion Journal, Vol. 16, Iss. 3, 1981-01 ,pp. : 140-144

Maney Publishing

Access to resources Recommend Favorite

Galvanic corrosion of gas tungsten arc repair welds in 17-4PH stainless steel in 3·5% NaCl solution

By Shoushtari M R Tavakoli   Moayed M H   Davoodi A  

Corrosion Engineering, Science and Technology, Vol. 46, Iss. 4, 2011-06 ,pp. : 406-414

Maney Publishing

Access to resources Recommend Favorite

Technical note Influence of quarternary amine alkyl chain length on corrosion inhibition of mild steel in CO₂ saturated 5%NaCl solution at pH 6·5

By MALIK H.  

British Corrosion Journal, Vol. 32, Iss. 2, 1997-01 ,pp. : 150-152

Maney Publishing

Access to resources Recommend Favorite

Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3·5%NaCl

By Tavakoli Shoushtari M R   Moayed M H   Davoodi A  

Corrosion Engineering, Science and Technology, Vol. 46, Iss. 4, 2011-06 ,pp. : 415-424

Maney Publishing

Access to resources Recommend Favorite

Corrosion inhibition of steel by thiourea and cations under incomplete cathodic protection in a 3.5% NaCl solution and seawater

By      

Journal of Applied Electrochemistry, Vol. 29, Iss. 8, 1999-08 ,pp. : 911-918

Springer Publishing Company

Access to resources Recommend Favorite