Microstructure and micro-hardness analyses of titanium alloy Ti-6Al-4V parts manufactured by selective laser melting

Publisher： Edp Sciences

E-ISSN： 2261-236x|94|issue|03009-03009

ISSN： 2261-236x

Source： MATEC Web of conference, Vol.94, Iss.issue, 2017-01, pp. : 03009-03009

Access to resources Favorite

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting

By  

MATEC Web of conference, Vol. 27, Iss. issue, 2015-10 ,pp. : 02010-02010

Edp Sciences

Access to resources Recommend Favorite

Study of the impact of treatment modes on hardness, deformability and microstructure of VT6 (Ti-6Al-4V) and VV751P (Ni-15Co-10Cr) alloy samples after selective laser sintering

By  

MATEC Web of conference, Vol. 129, Iss. issue, 2017-11 ,pp. : 01055-01055

Edp Sciences

Access to resources Recommend Favorite

Effect of microstructure on fatigue crack tip field of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy

By Wang Kai  

MATEC Web of conference, Vol. 165, Iss. issue, 2018-05 ,pp. : 02009-02009

Edp Sciences

Access to resources Recommend Favorite

An investigation of dynamic mechanical behaviour of Ti6Al4V titanium alloy at room temperature

By  

MATEC Web of conference, Vol. 77, Iss. issue, 2016-10 ,pp. : 03002-03002

Edp Sciences

Access to resources Recommend Favorite

Strain localization during tensile Hopkinson bar testing of commercially pure titanium and Ti6Al4V titanium alloy

By Moćko Wojciech  

EPJ Web of Conference, Vol. 94, Iss. issue, 2015-09 ,pp. : 01011-01011

Edp Sciences

Access to resources Recommend Favorite