Application of a component mobility modeling technique to automotive suspension systems

By Ochcsner Scott D.   Bernhard Robert J.  

Noise Control Engineering Journal, Vol. 43, Iss. 3, 1995-05 ,pp. : 73-82

Institute of Noise Control Engineering

Access to resources Recommend Favorite

A case study comparing 1-D and 3-D analytical modeling methods for vehicle intake system design

By Aubert Allan   Green Edward L.   Bastiaan Jennifer   Leclercq Thomas  

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2005, Iss. 2, 2005-10 ,pp. : 503-508

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Analysis of the behavior and 2D modeling of ferrite inductors with E geometry: comparison with 3D model and real measurements

By  

EPJ Web of Conference, Vol. 40, Iss. issue, 2013-01 ,pp. : 17007-17007

Edp Sciences

Access to resources Recommend Favorite

Design and modeling of an autonomous multi-link snake robot, capable of 3D-motion

By  

MATEC Web of conference, Vol. 42, Iss. issue, 2016-02 ,pp. : 03006-03006

Edp Sciences

Access to resources Recommend Favorite

Uncertainty Analysis in Wastewater Engineering Modeling: Understanding the Limitations

By Griborio Alonso   McCorquodale J. Alex   Pitt Paul   Vinci Paul   Wang Tiezheng  

Proceedings of the Water Environment Federation, Vol. 2007, Iss. 17, 2007-10 ,pp. : 1584-1596

Water Environment Federation

Access to resources Recommend Favorite