Preparation of Semi-Solid A390 Aluminum Alloy Slurry through a Serpentine Pouring Channel

Publisher： Trans Tech Publications

E-ISSN： 1662-9779|2019|285|169-175

ISSN： 1012-0394

Source： Solid State Phenomena, Vol.2019, Iss.285, 2019-02, pp. : 169-175

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Refinement of Primary Silicon Grains in Semi-Solid Al-25%Si Hypereutectic Aluminum Alloy Slurry

By  

Solid State Phenomena, Vol. 2019, Iss. 285, 2019-02 ,pp. : 153-160

Trans Tech Publications

Access to resources Recommend Favorite

Addition of Swarf to Produce a Semi-Solid Slurry during High Pressure Die-Casting of AS9U3 Aluminum Alloy

By  

Solid State Phenomena, Vol. 2019, Iss. 285, 2019-02 ,pp. : 271-276

Trans Tech Publications

Access to resources Recommend Favorite

Metallurgical Interface of 7075/6061 Bimetallic Composite Ingot Casted by Semi-Solid Slurry and Molten Metal Pouring

By  

Solid State Phenomena, Vol. 2019, Iss. 285, 2019-02 ,pp. : 326-332

Trans Tech Publications

Access to resources Recommend Favorite

Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy

By  

Solid State Phenomena, Vol. 2019, Iss. 285, 2019-02 ,pp. : 253-258

Trans Tech Publications

Access to resources Recommend Favorite

Microstructural Development of Aluminum A201 Alloy Semi-Solid Processing Feedstock Produced by Different Routes

By  

Solid State Phenomena, Vol. 2019, Iss. 285, 2019-02 ,pp. : 302-310

Trans Tech Publications

Access to resources Recommend Favorite