Grain Size Effects on the Oxidation of Fe-33Ni-19Cr Alloy at 700°C

E-ISSN： 1662-7482|2014|699|151-156

ISSN： 1660-9336

Source： Applied Mechanics and Materials, Vol.2014, Iss.699, 2015-01, pp. : 151-156

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Effects of Ni and Mn on the Cavitation Erosion Resistance of Fe–Cr–C–Ni/Mn Austenitic Alloys

By Park Myung Kim Ki Shin Gyeong Yun Jae Shin Min Kim Seon

Tribology Letters, Vol. 52, Iss. 3, 2013-12 ,pp. : 477-484

Springer Publishing Company

Access to resources Recommend Favorite

Effects of temperature and sliding distance on the wear behavior of austenitic Fe-Cr-C-Si hardfacing alloy

By Lee Kwon-yeong Ko Kang Kim Ji Kim Gyung Kim Seon-jin

Tribology Letters, Vol. 26, Iss. 2, 2007-05 ,pp. : 131-135

Springer Publishing Company

Access to resources Recommend Favorite

Effect of Cr Addition on Microstructure and Mechanical Property of Cu-17Ni-3Al-1.2Fe Alloy

Applied Mechanics and Materials, Vol. 2014, Iss. 716, 2015-02 ,pp. : 52-56

Trans Tech Publications

Access to resources Recommend Favorite

The Influence of the Matrix Microstructure on Abrasive Wear Resistance of Heat-Treated Fe–32Cr–4.5C wt% Hardfacing Alloy

By Kazemipour M.

Tribology Letters, Vol. 39, Iss. 2, 2010-08 ,pp. : 181-192

Springer Publishing Company

Access to resources Recommend Favorite

Numerical Simulation and Experimental Investigation of Residual Stress in 06Cr19Ni10 Austenitic Stainless Steel Weld Joint with Effects of Strain-Strengthening

Applied Mechanics and Materials, Vol. 2016, Iss. 853, 2017-01 ,pp. : 204-208

Trans Tech Publications

Access to resources Recommend Favorite