The Influence of the Matrix Microstructure on Abrasive Wear Resistance of Heat-Treated Fe–32Cr–4.5C wt% Hardfacing Alloy

Author： Kazemipour M.  

Publisher： Springer Publishing Company

ISSN： 1023-8883

Source： Tribology Letters, Vol.39, Iss.2, 2010-08, pp. : 181-192

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

The Microstructure and Abrasive Wear Resistance of Fe-Cr-C Hardfacing Alloys with the Composition of Hypoeutectic, Eutectic, and Hypereutectic at Cr/C = 6

By Sabet H.  

Tribology Letters, Vol. 44, Iss. 2, 2011-11 ,pp. : 237-245

Springer Publishing Company

Access to resources Recommend Favorite

Effects of temperature and sliding distance on the wear behavior of austenitic Fe-Cr-C-Si hardfacing alloy

By Lee Kwon-yeong   Ko Kang   Kim Ji   Kim Gyung   Kim Seon-jin  

Tribology Letters, Vol. 26, Iss. 2, 2007-05 ,pp. : 131-135

Springer Publishing Company

Access to resources Recommend Favorite

Microstructural and sliding wear behaviour of a heat-treated zinc-based alloy

By Jovanović M.   Bobić I.   Djurić B.   Grahovac N.   Ilić N.  

Tribology Letters, Vol. 25, Iss. 3, 2007-03 ,pp. : 173-184

Springer Publishing Company

Access to resources Recommend Favorite

Low-Stress Abrasive Wear Behaviour of a 0.2% C Steel: Influence of Microstructure and Test Parameters

By Modi O.P.  

Tribology Letters, Vol. 15, Iss. 3, 2003-10 ,pp. : 249-255

Springer Publishing Company

Access to resources Recommend Favorite

Influence of Heat Treatments on the Microstructure and Mechanical Properties in Ti-10V-2Fe-3Al Alloy

By  

Applied Mechanics and Materials, Vol. 2015, Iss. 750, 2015-05 ,pp. : 160-165

Trans Tech Publications

Access to resources Recommend Favorite