Determining the Optimum Parting Direction in Plastic Injection Molds Based on Minimizing Rough Machining Time during Mold Manufacturing

Publisher： John Wiley & Sons Inc

E-ISSN： 1098-2329|37|1|194-201

ISSN： 0730-6679

Source： ADVANCES IN POLYMER TECHNOLOGY, Vol.37, Iss.1, 2018-02, pp. : 194-201

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Process Combination of Hydroforming and Injection Moulding for the In Situ Manufacturing of Metal and Plastic Composite Structures

By  

Materials Science Forum, Vol. 2015, Iss. 825, 2015-08 ,pp. : 522-529

Trans Tech Publications

Access to resources Recommend Favorite

Grain Boundary Parting Limit during Dealloying

By  

ADVANCED ENGINEERING MATERIALS (ELECTRONIC), Vol. 17, Iss. 2, 2015-02 ,pp. : 157-161

John Wiley & Sons Inc

Access to resources Recommend Favorite

A criterion for determining the optimum value of twist in the topological model

By Wei Zhaozhao   Ma Xiao   Zhang Xinping  

Philosophical Magazine Letters, Vol. 94, Iss. 5, 2014-05 ,pp. : 288-295

Taylor & Francis Ltd

Access to resources Recommend Favorite

Explicit Time‐Dependent Multi‐Hazard Cost Analysis Based on Parameterized Demand Models for the Optimum Design of Bridge Structures

By  

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, Vol. 30, Iss. 7, 2015-07 ,pp. : 541-554

John Wiley & Sons Inc

Access to resources Recommend Favorite

On the shape of the lubricant film for the optimum performance of a longitudinal rough slider bearing

By Andharia P.I.   Gupta J.L.   Deheri G.M.  

Industrial Lubrication and Tribology, Vol. 52, Iss. 6, 2000-06 ,pp. : 273-276

Emerald Group Publishing Ltd

Access to resources Recommend Favorite