3d Printing: 3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches (Small Methods 2/2018)

Publisher： John Wiley & Sons Inc

E-ISSN： 2366-9608|2|2|smtd.201870021-smtd.201870021

ISSN： 2366-9608

Source： Small Methods, Vol.2, Iss.2, 2018-02, pp. : n/a-n/a

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Small Methods, Vol. 2, Iss. 2, 2018-02 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

By Serex Ludovic Bertsch Arnaud Renaud Philippe

Micromachines, Vol. 9, Iss. 2, 2018-02 ,pp. : 86-86

MDPI

Access to resources Recommend Favorite

3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices

By Kundu Avra Ausaf Tariq Rajaraman Swaminathan

Micromachines, Vol. 9, Iss. 2, 2018-02 ,pp. : 85-85

MDPI

Access to resources Recommend Favorite

Fabrication of a Lab-on-Chip Device Using Material Extrusion (3D Printing) and Demonstration via Malaria-Ab ELISA

By Bauer Maria Kulinsky Lawrence

Micromachines, Vol. 9, Iss. 1, 2018-01 ,pp. : 27-27

MDPI

Access to resources Recommend Favorite

A Laminar Flow-Based Microfluidic Tesla Pump via Lithography Enabled 3D Printing

By Habhab Mohammed-Baker Ismail Tania Lo Joe Fujiou

Sensors, Vol. 16, Iss. 11, 2016-11 ,pp. : 1970-1970

MDPI

Access to resources Recommend Favorite