The Microstructure and Abrasive Wear Resistance of Fe-Cr-C Hardfacing Alloys with the Composition of Hypoeutectic, Eutectic, and Hypereutectic at Cr/C = 6

Author： Sabet H.  

Publisher： Springer Publishing Company

ISSN： 1023-8883

Source： Tribology Letters, Vol.44, Iss.2, 2011-11, pp. : 237-245

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

The Influence of the Matrix Microstructure on Abrasive Wear Resistance of Heat-Treated Fe–32Cr–4.5C wt% Hardfacing Alloy

By Kazemipour M.  

Tribology Letters, Vol. 39, Iss. 2, 2010-08 ,pp. : 181-192

Springer Publishing Company

Access to resources Recommend Favorite

Effects of temperature and sliding distance on the wear behavior of austenitic Fe-Cr-C-Si hardfacing alloy

By Lee Kwon-yeong   Ko Kang   Kim Ji   Kim Gyung   Kim Seon-jin  

Tribology Letters, Vol. 26, Iss. 2, 2007-05 ,pp. : 131-135

Springer Publishing Company

Access to resources Recommend Favorite

Effects of Ni and Mn on the Cavitation Erosion Resistance of Fe–Cr–C–Ni/Mn Austenitic Alloys

By Park Myung   Kim Ki   Shin Gyeong   Yun Jae   Shin Min   Kim Seon  

Tribology Letters, Vol. 52, Iss. 3, 2013-12 ,pp. : 477-484

Springer Publishing Company

Access to resources Recommend Favorite

Microabrasion Wear Behavior of VC and CrC Coatings Deposited by Thermoreactive Diffusion Technique

By Kurt Bülent   Küçük Yilmaz   Sabri Gök M.  

Tribology Transactions, Vol. 57, Iss. 2, 2014-03 ,pp. : 345-352

Taylor & Francis Ltd

Access to resources Recommend Favorite

Strain-Induced ε/α′ Martensitic Transformation Behavior and Solid Particle Erosion Resistance of Austenitic Fe–Cr–C–Mn/Ni Alloys

By Park Myung   Kim Ki   Yun Jae   Shin Gyeong   Kim Seon  

Tribology Letters, Vol. 54, Iss. 1, 2014-04 ,pp. : 51-58

Springer Publishing Company

Access to resources Recommend Favorite