High-accuracy calibration in the vacuum range 0.3 Pa to 4000 Pa using the primary standard of static gas expansion

Author： Jitschin W.  

Publisher： IOP Publishing

ISSN： 0026-1394

Source： Metrologia, Vol.39, Iss.3, 2002-09, pp. : 249-261

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

New, fully automated, primary standard for generating vacuum pressures between 10-10 Pa and 3 x 10-2 Pa with respect to residual pressure

By Jousten K.   Menzer H.   Wandrey D.   Niepraschk R.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 493-497

IOP Publishing

Access to resources Recommend Favorite

New absolute pressure standard in the range 1 Pa to 7 kPa

By Rendle C. G.   Rosenberg H.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 613-615

IOP Publishing

Access to resources Recommend Favorite

A primary pressure standard at 100 kPa

By Schmidt J. W.   Cen Yueqin   Driver R. G.   Bowers W. J.   Houck J. C.   Tison S. A.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 525-529

IOP Publishing

Access to resources Recommend Favorite

Foreword: Pressure Metrology from Ultra-High Vacuum to Very High Pressures -10-7 Pa to 109 Pa

By Molinar G. F.   Simpson D.   Tilford C.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 489-490

IOP Publishing

Access to resources Recommend Favorite

CCM key comparison in the pressure range 50 kPa to 1000 kPa (gas medium, gauge mode). Phase A2: Pressure measurements

By Legras J. C.   Sabuga W.   Molinar G. F.   Schmidt J. W.  

Metrologia, Vol. 36, Iss. 6, 1999-12 ,pp. : 663-668

IOP Publishing

Access to resources Recommend Favorite