Effect of flow induced alignment on the thermal conductivity of injection molded carbon nanotube‐filled polystyrene nanocomposites

Publisher： John Wiley & Sons Inc

E-ISSN： 1548-2634|55|4|753-762

ISSN： 0032-3888

Source： POLYMER ENGINEERING & SCIENCE, Vol.55, Iss.4, 2015-04, pp. : 753-762

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Influence of different β‐nucleating agent on crystallization behavior, morphology, and melting characteristic of multiwalled carbon nanotube‐filled isotactic polypropylene nanocomposites

By  

POLYMER COMPOSITES, Vol. 36, Iss. 4, 2015-04 ,pp. : 635-643

John Wiley & Sons Inc

Access to resources Recommend Favorite

Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites

By  

POLYMER ENGINEERING & SCIENCE, Vol. 56, Iss. 10, 2016-10 ,pp. : 1182-1190

John Wiley & Sons Inc

Access to resources Recommend Favorite

Effect of melt flow on morphology and linear thermal expansion of injection‐molded ethylene–propylene–diene terpolymer/isotactic polypropylene blends

By  

POLYMER INTERNATIONAL, Vol. 64, Iss. 9, 2015-09 ,pp. : 1225-1234

John Wiley & Sons Inc

Access to resources Recommend Favorite

Correlation between morphological properties and thermal conductivity of injection‐molded polyamide 46

By  

POLYMER ENGINEERING & SCIENCE, Vol. 32-3888, Iss. 10, 2015-10 ,pp. : 2231-2236

John Wiley & Sons Inc

Access to resources Recommend Favorite

Correlation between morphological properties and thermal conductivity of injection‐molded polyamide 46

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 10, 2015-10 ,pp. : 2231-2236

John Wiley & Sons Inc

Access to resources Recommend Favorite