Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding

Publisher： John Wiley & Sons Inc

E-ISSN： 1548-2634|55|4|807-835

ISSN： 0032-3888

Source： POLYMER ENGINEERING & SCIENCE, Vol.55, Iss.4, 2015-04, pp. : 807-835

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Microcellular Foam Injection Molding of Thermoplastics Using Green Physical Blowing Agent

By  

Materials Science Forum, Vol. 2016, Iss. 875, 2016-11 ,pp. : 77-111

Trans Tech Publications

Access to resources Recommend Favorite

Fabrication of highly expanded thermoplastic polyurethane foams using microcellular injection molding and gas‐laden pellets

By  

POLYMER ENGINEERING & SCIENCE, Vol. 32-3888, Iss. 11, 2015-11 ,pp. : 2643-2652

John Wiley & Sons Inc

Access to resources Recommend Favorite

Fabrication of highly expanded thermoplastic polyurethane foams using microcellular injection molding and gas‐laden pellets

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 11, 2015-11 ,pp. : 2643-2652

John Wiley & Sons Inc

Access to resources Recommend Favorite

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

By  

ADVANCES IN POLYMER TECHNOLOGY, Vol. 33, Iss. 1, 2014-03 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

A Review of the Effect of Process Parameters on the Performance of Plastic Injection Molding Process to Control the Warpage in Plastics

By  

Materials Science Forum, Vol. 2015, Iss. 830, 2015-10 ,pp. : 116-119

Trans Tech Publications

Access to resources Recommend Favorite